Oki B820N Setup Instructions page 84

Category
PCL A4 PRINT
EMULATION WIDTH
※6
WHITE PAGE
SKIP
CR FUNCTION
LF FUNCTION
PRINT MARGIN
PEN WIDTH
ADJUST
TRAY ID#
2 2
PPR CHARACTER
EMULATION PITCH
FONT
CONDENSE
CHARACTER
SET
SYMBOL SET
Reboot the printer, and the settings on PCL emulation menu is returned to the default.
※6
84
User Menu
Item Value
78 COLUMN
80 COLUMN
ON
OFF
CR
CR+LF
LF
LF+CR
NORMAL
1/5 INCH
1/6 INCH
ON
OFF
TRAY ID#
PCL T0ID 1
4
59
PCL T1ID 1
5
59
PCL T2ID 1
5
59
PCL T3ID 1
20
59
10 CPI
12 CPI
17 CPI
20 CPI
PROPORTIONAL
12CPI TO 20CPI
12CPI TO 12CPI
SET-2
SET-1
IBM-437
IBM-850
IBM-860
IBM-863
IBM-865
PC Set1
PC Ext US
PC Ext D/N
PC Set2 US
PC Set2 D/N
Roman-8
ISO L1
Function / Notes
Sets in PCL the number of characters for A4 paper Auto
LF.
Sets whether to eject or not a page without any data to
print (blank page) upon reception of FF command (OCH)
in PCL Mode.
When the PCL printer driver [Job Options] tab, the print
mode is set to PCL mode, this setting is valid.
Sets performance when CR code is received in PCL.
Sets performance when LF code is received in PCL.
Sets a non-printable area of paper.
NORMAL: PCL emulation compatible, approximately
1/4~1/4.3INCH (depending on paper) is outside the
printable area.
When the minimum width is specified in PCL, if you draw
a 1-dot line, it sometimes looks broken.
The MP tray ~ Tray 3 settings.
Sets the # to specify the MPTray for the paper feed
destination command (ESC&l#H) in PCL5e emulation.
Sets the # to specify Tray 1 for the paper feed destination
command (ESC&l#H) in PCL5e emulation.
Sets the # to specify Tray 2 for the paper feed destination
command (ESC&l#H) in PCL5e emulation.
Displayed only if the Tray 2 is installed.
Sets the # to specify Tray 3 for the paper feed destination
command (ESC&l#H) in PCL5e emulation.
Displayed only if the Tray 3 is installed.
Specifies character pitch in IBM PPR emulation.
Specifies 12CPI pitch for Condense Mode.
Sets a character set.
Sets a symbol set.
B840dn B820n
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
△ ○
△
○ ○
○ ○
○ ○
○ ○