Download Print this page

Oki B8300 Installation Manual

Oki b8300: install guide
Hide thumbs Also See for B8300:

Advertisement

Advertisement

loading

Summary of Contents for Oki B8300

  • Page 2 Installation Manual for B8300 Finishing device Finishing device Duplex/bypass device and Its Peripheral Devices To install the devices efficiently, follow the procedure below. Finishing device Main unit Main unit Some peripheral devices may have been installed as standard devies depending on the main unit model.
  • Page 3 * If another peripheral device must be installed, carry out the following step at the end of the multi purpose drawer. the printer. FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. installation work. SEE OKI DIGITAL PRINTER SERVICE MANUAL OR INSTALLATION MANUAL TO DETERMINE SUITABILITY.
  • Page 4 <1>Attach rear Rear mounting plate FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. mounting plates using SEE OKI DIGITAL PRINTER SERVICE MANUAL OR Connect the AC cord of the <1>...
  • Page 5 6. Attach the power supply unit. Rear mounting plate Attach the power supply unit to the brackets and secure it using the three FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. Attach the two rear mounting <2> Attach the AC inlet cover <1>...
  • Page 6 <1> Remove the remainder of packing tape from the <2> Remove the locking FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. operation panel. tape from the right and left SEE OKI DIGITAL PRINTER SERVICE MANUAL OR INSTALLATION MANUAL TO DETERMINE SUITABILITY.
  • Page 7: Check The Printer Operation

    [WARMING UP] will appear on Do not exceed the maximum height line. (up to 500 sheets the operation panel. After the level adjustment is complete, of OKI recommended paper can be loaded) the ready indicator will light up. Caution While automatic adjustment of the toner density sensor is being done, do not turn the power to the machine off.
  • Page 8 Hook screw. Hook the upper part of the duplex FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. SEE OKI DIGITAL PRINTER SERVICE MANUAL OR module on the openings of the INSTALLATION MANUAL TO DETERMINE SUITABILITY. left door of the main unit of the printer.
  • Page 9 4. Connect the harness to the main unit of the printer. 5. Attach the exit tray. Screw FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. <1> Remove the screw that SEE OKI DIGITAL PRINTER SERVICE MANUAL OR fixes the harness cover of the INSTALLATION MANUAL TO DETERMINE SUITABILITY.
  • Page 10 Attach the power supply unit to the brackets and secure it using the FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. drawer temporarily. of the printer. SEE OKI DIGITAL PRINTER SERVICE MANUAL OR supplied three screws.
  • Page 11 FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. If a stand/MPD & 2000 sheet paper drawer or a stand/3 x 500 sheet SEE OKI DIGITAL PRINTER SERVICE MANUAL OR <1>...
  • Page 12 Exterior FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. Remove the two screws drawer in a similar way to step 3. Exterior...
  • Page 13: Installation Manual

    Remove the clamps that fix Staple unit front cabinet in the direction the harness, handle the wiring FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. indicated by the arrow and of harness A (purple) and SEE OKI DIGITAL PRINTER SERVICE MANUAL OR remove the front cabinet.
  • Page 14 5. Attach the control PWB. 3. Remove the control PWB unit. Remove the five screws that FOR USE WITH COMPATIBLE OKI DIGITAL PRINTERS. Attach the control PWB unit to fix the control PWB unit to SEE OKI DIGITAL PRINTER SERVICE MANUAL OR the main unit of the printer and the main unit of the printer.
  • Page 15 Electrical Setting/ Adjustment/ Operation Check • Applied model: B83DB [1] Installation of driver software, [2] Paper guide position adjustment setting, and operation check and off center adjustment Adjust the position of the paper guides of the bypass tray. • Applied model: Main unit <1>...
  • Page 16 • Applied models: B83MP / B83LT / B83TT / B83D / B83DB (Fig. 1) (Fig. 2) Carry out the off center adjustment. [Rear side of the main unit] [Rear side of the main unit] Top end of paper Top end of paper <1>...