Additional Memory - Oki B820N Setup Instructions

Additional Memory

You can install additional memory to the printer to increase the memory capacity of the printer. When
the printer has a memory storage error "System memory overflows" due to a large data, or displays
"COLLATE FAIL" in making collated sets of copies, install additional memory.
• Be sure to use Oki Data original genuine additional memory. Oki Data does not guarantee the operations of the
Note!
printer if non Oki Data genuine additional memory is used for the printer.
• The printer has one memory slot.
1
Turn off the printer and remove the
power cord and the printer cable.
Installing additional memory to the printer with the
Note!
printer turned on may damage the printer or the

additional memory.

To turn off the printer, refer to
Memo
Printer" (page 20).
2
Open the top cover and the front
cover.
❶
Press the OPEN button to open the top
cover.
OPEN button
❷
Open the multi-purpose tray.
Multi-purpose Tray
Additional Memory
"
Turning Off the
3
Top Cover
❸
Push up the (blue) handle at the center
of the front cover to open it.
Handle(Blue)
Remove the side cover.
❶
Loosen the (two) screws.
❷
Remove the side cover.
Move the side cover outwards to remove
it while holding it by the upper portion.
Front Cover
Screws
Side Cover
25
Options
1