❻
The first byte of the IP address blinks. Press
the
or
button more than once to
display the value you want to set.
Press the button for 2 seconds or
more consecutively and the value fast
forwards.
IP ADDRESS
192 .
❼
Press the ENTER
byte of the IP address blinks.
❻
Repeat steps
~
of the IP address.
IP ADDRESS
192 . 168 .
❽
Press the BACK
❾
Press the
button more than once
to set [SUBNET MASK] and [GATEWAY
ADDRESS] in the same way.
❿
Press the ON LINE
finish setting them.
The settings are stored on the printer
and the network functions restarts.
The setup is complete when the operator panel
displays [ONLINE].
0 .
0 .
0
button. The second
❼
to set all the bytes
0 .
2
button.
button when you
For a USB Connection
❶
Prepare a USB cable.
No printer cables are supplied with the printer.
Note!
Separately prepare a USB-2.0 cable.
❷
Connect the USB cable.
Plug the USB cable into the USB
①
interface connector of the printer.
Be careful not to plug the USB cable
Note!
into the network interface connector.
Otherwise error may occur.
Plug the USB cable into the
②
USB interface connector of your
computer.
USB Interface Connector
35
Connecting a Cable
1