Setup Program; Hardware; Compatible Operating Systems - JUMO 709061/8-01-032 Operating Manual

H

7.1 Hardware

7.2 Compatible operating systems

Users
H
Software
versions
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
The setup program enables all data for the device to be configured conve-
niently on a PC so that it can then be transferred to the device.
To configure the power controller, all you need to do is insert the USB
cable into the power controller and connect it to the PC.
The configuration data is applied as soon as the device is switched on.
- 500 MB hard disk space
- 512 MB RAM
- Microsoft® Windows® 2000/XP/Vista
- Windows® 7 32-bit
- Windows® 7 64-bit
If several users are managed on one computer, make sure that the user
who is logged in is the person who will be working with the program lat-
er.
The user must have administrator rights for installing the software. After
installation, the rights can be restricted again.
Failure to observe this information means that correct and complete installa-
tion cannot be guaranteed!
The software versions for the device and the setup program must be compati-
ble. An error message will appear if this is not the case!
h After switching on the device, press
The device software version is shown in the Device info menu.
h Click "Info" in the setup program menu bar
On the device In the setup program

7 Setup program

95