5 Configuration
5.1.10 PROFIBUS-DP
Device address
Data format
5.1.11 JUMO mTRON T system interface
Alias device ad-
dress
5.1.12 Changing codes
Code, manual
mode
Code, operator lev-
el
Code, config. level
74
Interface parameters for PROFIBUS-DP (see separate manual)
Value / settings
1 to 125
Motorola®, Intel®
k
/ bold = default setting
For communication with the JUMO mTRON T automation system, see documentation
70500153T90...
Value / settings
1 to 99
Here, it is possible to assign passwords (4-digit numeric codes) for manual
mode, operator level, and configuration level to protect them from unautho-
rized access.
Value / settings
0000 to 9999
0000 to 9999
0000 to 9999
k
/ bold = default setting
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
Description
If "0" is set as the device address, the bus fault error message
is not displayed.
Description
If several TYA-20X devices are located in the JUMO mTRON T
system bus, the user can identify each individual device by en-
tering various alias device addresses.
Description
0000 means: no inhibit
9999 means: level is hidden
0000 means: no inhibit
9999 means: level is hidden
0000 means: no inhibit