Changing The Language Of The Device Texts - JUMO 709061/8-01-032 Operating Manual

7 Setup program

7.6 Changing the language of the device texts

100
The default national language is specified in the order details. Only one nation-
al language can be transmitted to the device with the setup program.
h Connect the device to the PC using the USB cable
h Start the setup program
h Perform a Data transfer
r
h Edit
Execute hardware and the hardware wizard will start
h Click Automatic detection and the dialog for the device language will ap-
pear.
h Select the desired national language
h Continue in the hardware wizard by clicking Continue until it is completed
The device texts in the selected national language can now be found in the
setup file.
h Perform a Data transfer
h Save the setup file and wait until the data transmission has been success-
fully completed
The device now restarts and texts will appear on the display in the desired na-
tional language.
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]]
r
from the device
r
To the device