7 Setup program
7.4 Program start
Diagnostics
H
98
h Start the setup program using the Windows® Start menu
h Connect the socket of the power controller to a USB socket on the PC us-
ing the supplied USB cable
h Click Connect in the menu bar
The diagnosis window appears at the bottom of the screen and shows the de-
vice info and the current measurement data. The connection has been estab-
lished.
The power controller supplies no power while setup data is being transferred
"to the device". The device restarts after the transmission.
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]]