Device Data; Language Wizard Active; Temperature Unit; Display Contrast - JUMO 709061/8-01-032 Operating Manual

5 Configuration
5.1.1

Device data

Language wizard
active
National language

Temperature unit

Display contrast

Switch-off

Display lighting

Apply default set-
tings
5.1.2

Power controller

Mains switching
variant

Thyristor control

56
Basic settings for display and temperature unit.
Value / settings
Yes
No
German
English
French
Setup
°C
°F
0...50...100 %
0000 to 1440 min
Apply now?
k
/ bold = default setting
Settings for the switching behavior of the power controller in the plant
Value / settings
Single-phase opera-
tion
Free-running
economy circuit
Continuous (power
controller)
Logic (switch)
k
/ bold = default setting
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
Description
A query appears when the device is started, asking which na-
tional language is to be used to display the subsequent opera-
tion.
No query appears
Spanish is added to Setup per default.
Spanish can be replaced with other national languages if
needs be.
Defines the unit for the displayed temperatures, such as the
device temperature.
Bright/dark contrast setting
The background lighting for the display switches off once the
selected number of minutes has passed. Power LED (green)
flashes.
0000 means: lighting is always switched on
The default settings are restored if the PGM key is pressed.
Description
v Chapter 3.4 "Switch-on sequence" or
Chapter 3.4.2 "Single-phase operation: phase /
phase"
Note:
- Check for clockwise phasing
- Only possible with P-control (code 001 in order code)
v Chapter 3.4.5 "Free-running economy circuit with
purely resistive loads"
The power controller provides the power for the load continu-
ously according to the setpoint specification.
Note:
Subordinate control loop cannot be modified!
The power controller acts like a switch and provides the power
by either switching ON or OFF.