Analog Inputs; Analog Output (Actual Value Output); Display And Measuring Accuracy; Digital Inputs - JUMO 709061/8-01-032 Operating Manual

10 Technical data

10.3 Analog inputs

Current
Voltage

10.4 Analog output (actual value output)

Analog output

10.4.1Display and measuring accuracy

Mains voltage: ±2.5 %
Analog input
Voltage/current: ±1 %

10.5 Digital inputs

Digital input 1
Digital input 2

10.6 Digital output (fault signal output)

Relay (changeover contact)
without contact protection
circuit
Optocoupler output
114
0 (4) to 20 mA R
0 (2) to 10 V R
0 (1) to 5 V R
Switched off as standard.
I = 20 mA for standard signal voltage: 0 to 10 V, 2 to 10 V, 0 to 5 V up
max
to 1 to 5 V.
Burden max. 500 Ω for standard signal current: 0 to 20 mA up to
4 to 20 mA
Depending on the device type, various internal measurands such as load
current, load voltage, or power can be output.
All specifications refer to the power controller nominal data.
Load current: ±1 %
Analog output
Voltage/current: ±1 %
TYA
12
Analog-
output
11
For connection to potential-free contact
30,000 switching operations at a switching capacity of AC 230 V / 3 A
(1.5 A), 50 Hz, B300 (UL 508)
I = 2 mA, U
Cmax
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
= 50 Ω
i
= 25 kΩ
i
= 25 kΩ
i
±1 %
Load voltage:
Load resistance: ±2 %
(For resistive load)
= 32 V
CEOmax
Power: ±2 %