Configuration; Configuration Level - JUMO 709061/8-01-032 Operating Manual

5.1 Configuration level

H
Parameter
groups
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
The configuration level contains parameters for configuring the power control-
ler.
If the parameters at this level are modified during operation, the power control-
ler is locked (inhibit function) as a result. It does not provide any power in this
state.
When exiting the configuration level with the
continues operation with the modified parameters.
This level can be locked with a password.
However, no password is set per default.
All parameters for the maximum device extension level are listed in the fol-
lowing tables. Depending on the device version (see nameplate) or configura-
tion, parameters that are not required are hidden.
The configuration level can be accessed from the overview of measured val-
ues by pressing the following keys:
h In the measured value overview, press the
h Select the configuration level and press
The parameters are combined in the following groups, which are explained in
detail as sub-chapters in the tables on the following pages.
v Chapter 5.1.1 "Device data"
v Chapter 5.1.2 "Power controller"
v Chapter 5.1.3 "Analog inputs"
etc.
v see Chapter 5.1.9 "RS422/485"
v see Chapter 5.1.10 "PROFIBUS-DP"
v see Chapter 5.1.11 "JUMO mTRON T
system interface"

5 Configuration

key, the power controller
key
55