Performing Teach-In In Manual Mode - JUMO 709061/8-01-032 Operating Manual

6.2.3 Performing Teach-In in manual mode

Repeating
Teach-In
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
If Teach-In is being performed for the first time, the message "Teach-In load
monitoring" appears in the bottom line of the display.
The power controller is in the "Measured value overview" level.
h Press the
key twice to return to manual mode.
If Teach-In is being performed for the first time, the message "Teach-In load
monitoring" now appears in the bottom line of the display.
h Press the
key and the following message will appear:
h Press the
key to apply the current load state as the OK state.
A change in the load (load error) will be evaluated by the device on the basis of
this state.
Teach-In can be repeated any number of times in manual mode
h Press the
key and the following message will appear:
h Press the
key to apply the current load state as the OK state.
6 Special device functions
81