Note Symbols; Performing An Action; Display Types - JUMO 709061/8-01-032 Operating Manual

1.2.2 Note symbols

Note
H
Reference
Footnote

1.2.3 Performing an action

Action
instruction
Vital text
Command se-
quence

1.2.4 Display types

Keys
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
This symbol is used to draw your attention to a particular issue.
v
This symbol refers to further information in other manuals, chap-
ters, or sections.
1 Footnotes are remarks that refer to specific parts of the text. Foot-
abc
notes consist of two parts:
An identification marking in the text, and the footnote text itself.
The markers in the text are arranged as continuous superscript
numbers.
h Plug in the
This symbol marks the description of a required action. The
connector individual steps are marked by this asterisk
V READ THE DOCUMENTATION!
This symbol, which is attached to the device, indicates that the as-
sociated device documentation must be observed. This is nec-
essary in order to recognize the nature of the potential danger and
take the necessary measures to prevent it.
Config. level r Power controller r
Operating mode
Small arrows between words are designed
to make it easier to find parameters in the
configuration level.
Keys are displayed as symbols or text.
Key combinations are represented by a plus sign.
1 Introduction
9