Operation; Display After Switching On The Device - JUMO 709061/8-01-032 Operating Manual

4.1 Display after switching on the device

Hourglass and
national lan-
guage selection
Language wiz-
ard
Error messages
V1.04/EN/00561071 [Thyristor Power Switch TYA 201]
As soon as the voltage supply is switched on, the Power LED first lights up
permanently in green and an hourglass briefly appears on the display. The
power controller then shows a range of language options on the display.
Select the national language and confirm your selection with
This option enables you to select whether the language wizard should be reac-
tivated the next time the device is started.
Select "Yes" or "No", press
Measured values then appear on the device.
v Chapter 4.1.2 "Appearance of measured values".
The following chapter explains the error messages that may appear in the info
line at the bottom of the screen:
Chapter 8 "Error messages and alarms"
.

4 Operation

.
45