Display Menu Keys - Danfoss VLT Decentral Drive FCD 302 Operating Manual

User Interface
•
Each display read-out has a parameter associated
with it.
•
The frequency converter status at the bottom line
of the display is generated automatically and is
not selectable. See chapter 6.3 Status Message
Definitions for more information.
Display Parameter number
1.1 0-20
1.2 0-21
1.3 0-22
2 0-23
3 0-24
Table 4.1 LCP Display Values
Status
799 RPM 0.98 A
1.1
0.000
1.2
53.2 %
Auto Remote Ramping
2
3
Illustration 4.2 LCP Display Values
Status
207RPM
0.98 A
1.1
6.9
Auto Remote Running
Illustration 4.3 LCP Display Values
MG04F402
Operating Guide
Default setting
Motor RPMs
Motor current
Motor power (kW)
Motor frequency
Reference in percent
1 (1)
0.75 kW
1.3
1 (1)
0.75 kW
1.3
Hz
1.2
2
Danfoss A/S © 05/2016 All rights reserved.

4.1.3 Display Menu Keys

Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Quick
Status
Menu
Illustration 4.4 Menu Keys
Key Function
Status Shows operational information.
•
In Auto mode, press to toggle between
status readout displays.
•
Press repeatedly to scroll through each
status display.
•
Press [Status] plus [
display brightness.
•
The symbol in the upper right corner of the
display shows the direction of motor
rotation and which set-up is active. This is
not programmable.
Quick Menu
Allows access to programming parameters for
initial set-up instructions and many detailed
application instructions.
•
Press to access Q2 Quick Set-up for
sequenced instructions to program the basic
frequency controller set-up.
•
Follow the sequence of parameters as
presented for the function set-up.
Main Menu
Allows access to all programming parameters.
•
Press twice to access top-level index.
•
Press once to return to the last location
accessed.
•
Press to enter a parameter number for direct
access to that parameter.
Alarm Log Displays a list of current warnings, the last 10
alarms, and the maintenance log.
•
For details about the frequency converter
before it entered the alarm mode, select the
alarm number using the navigation keys
and press [OK].
Table 4.2 Function Description Menu Keys
Main Alarm
Menu Log
▲ ▼
] or [ ] to adjust the
33
4 4