Danfoss VLT Decentral Drive FCD 302 Operating Manual page 46

Programming
5.3.3 2-** Brakes
Par- Parameter description
ameter #
2-0* DC-Brake
2-00 DC Hold Current
2-01 DC Brake Current
2-02 DC Braking Time
2-03 DC Brake Cut In Speed [RPM]
2-04 DC Brake Cut In Speed [Hz]
5 5
2-05 Maximum Reference
2-06 Parking Current
2-07 Parking Time
2-1* Brake Energy Funct.
2-10 Brake Function
2-11 Brake Resistor (ohm)
2-12 Brake Power Limit (kW)
2-13 Brake Power Monitoring
2-15 Brake Check
2-16 AC brake Max. Current
2-17 Over-voltage Control
2-18 Brake Check Condition
2-19 Over-voltage Gain
2-2* Mechanical Brake
2-20 Release Brake Current
2-21 Activate Brake Speed [RPM]
2-22 Activate Brake Speed [Hz]
2-23 Activate Brake Delay
2-24 Stop Delay
2-25 Brake Release Time
2-26 Torque Ref
2-27 Torque Ramp Up Time
2-28 Gain Boost Factor
2-29 Torque Ramp Down Time
2-3* Adv. Mech Brake
2-30 Position P Start Proportional Gain
2-31 Speed PID Start Proportional Gain
2-32 Speed PID Start Integral Time
2-33 Speed PID Start Lowpass Filter Time
44
®
VLT Decentral Drive FCD 302
Default value 4 set-up
50 % All set-ups
50 % All set-ups
10 s All set-ups
ExpressionLimit All set-ups
ExpressionLimit All set-ups
MaxReference
(P303) All set-ups
50 % All set-ups
3 s All set-ups
ExpressionLimit All set-ups
ExpressionLimit All set-ups
ExpressionLimit All set-ups
[0] Off All set-ups
[0] Off All set-ups
100 % All set-ups
[0] Disabled All set-ups
[0] At Power Up All set-ups
100 % All set-ups
ImaxVLT (P1637) All set-ups
ExpressionLimit All set-ups
ExpressionLimit All set-ups
0 s All set-ups
0 s All set-ups
0.20 s All set-ups
0 % All set-ups
0.2 s All set-ups
1 N/A All set-ups
0 s All set-ups
0.0000 N/A All set-ups
0.0150 N/A All set-ups
200.0 ms All set-ups
10.0 ms All set-ups
Danfoss A/S © 05/2016 All rights reserved.
Change during Conversion
operation index
TRUE 0
TRUE 0
TRUE -1
TRUE 67
TRUE -1
TRUE -3
TRUE 0
TRUE -1
TRUE –
TRUE 0
TRUE 0
TRUE –
TRUE –
TRUE -1
TRUE –
TRUE –
TRUE 0
TRUE -2
TRUE 67
TRUE -1
TRUE -1
TRUE -1
TRUE -2
TRUE -2
TRUE -1
TRUE -2
TRUE -1
TRUE -4
TRUE -4
TRUE -4
TRUE -4
Type
Uint8
Uint16
Uint16
Uint16
Uint16
Int32
Uint16
Uint16
Uint8
Uint16
Uint32
Uint8
Uint8
Uint32
Uint8
Uint8
Uint16
Uint32
Uint16
Uint16
Uint8
Uint8
Uint16
Int16
Uint8
Uint16
Uint8
Uint32
Uint32
Uint32
Uint16
MG04F402