Programming; Introduction; Quick Setup - Danfoss VLT Decentral Drive FCD 302 Operating Manual

Programming

5 Programming

5.1 Introduction

The frequency converter is programmed for its application
functions using parameters. Parameters are accessed by
pressing either [Quick Menu] or [Main Menu] on the LCP.
(See chapter 4 User Interface for details on using the LCP
function keys.) Parameters may also be accessed through a
PC using the MCT 10 Set-up Software(see
5 5
chapter 5.4.1 Remote Programming with MCT 10 Set-up
Software).
The quick menu is intended for initial start up. Data
entered in a parameter can change the options available in
the parameters following that entry. The quick menu
presents easy guidelines for getting most systems up and
running.
The main menu accesses all parameters and allows for
advanced frequency converter applications.

5.2 Quick Setup

0-01 Language
Option:
[0] English
*
[1] Deutsch
[2] Francais
[3] Dansk
[4] Spanish
[5] Italiano
[6] Svenska
[7] Nederlands
[10] Chinese
[20] Suomi
[22] English US
[27] Greek
[28] Bras.port
[36] Slovenian
[39] Korean
36
®
VLT Decentral Drive FCD 302
Function:
Defines display language. The frequency
converter is delivered with 4 different
language packages. English and German
are included in all packages. English
cannot be erased or manipulated.
Part of language packages 1–4
Part of language packages 1–4
Part of language package 1
Part of language package 1
Part of language package 1
Part of language package 1
Part of language package 1
Part of language package 1
Part of language package 2
Part of language package 1
Part of language package 4
Part of language package 4
Part of language package 4
Part of language package 3
Part of language package 2
Danfoss A/S © 05/2016 All rights reserved.
0-01 Language
Option: Function:
[40] Japanese Part of language package 2
[41] Turkish Part of language package 4
[42] Trad.Chinese Part of language package 2
[43] Bulgarian Part of language package 3
[44] Srpski Part of language package 3
[45] Romanian Part of language package 3
[46] Magyar Part of language package 3
[47] Czech Part of language package 3
[48] Polski Part of language package 4
[49] Russian Part of language package 3
[50] Thai Part of language package 2
[51] Bahasa Part of language package 2
Indonesia
[52] Hrvatski Part of language package 3
1-20 Motor Power [kW]
Range: Function:
NOTICE
Size [ 0.09 -
related 3000.00
*
This parameter cannot be adjusted
kW]
while the motor is running.
Enter the nominal motor power in kW
according to the motor nameplate data.
The default value corresponds to the
nominal rated output of the frequency
converter.
This parameter is visible in the LCP if
parameter 0-03 Regional Settings is set to
[0] International.
1-22 Motor Voltage
Range: Function:
Size [ 10 - Enter the nominal motor voltage
related 1000 V] according to the motor nameplate
*
data. The default value corresponds to
the nominal rated output of the
frequency converter.
MG04F402