Setting Lcp Display Values; Display Menu Keys - Danfoss FC 102 Operating Instructions Manual

User Interface

5.1.2 Setting LCP Display Values

The display area is activated when the frequency converter
receives power from mains voltage, a DC bus terminal, or
an external 24 V DC supply.
The information displayed on the LCP can be customized
for user application.
•
Each display readout has a parameter associated
with it
•
Options are selected in the quick menu Q3-13
Display Settings
•
Display 2 has an alternate larger display option
•
The frequency converter status at the bottom line
of the display is generated automatically and is
not selectable
Status
799 RPM
1.1
1.2
Auto Remote Ramping
2
3
Illustration 5.2 Display Readouts
Status
207RPM
1.1
Auto Remote Running
Illustration 5.3 Display Readouts
MG16D302
Operating Instructions
1 (1)
7.83 A 36.4 kw
0.000
53.2 %
1.3
1 (1)
5.25A 24.4 kW
6.9
Hz
1.3
1.2
2
Danfoss A/S © Rev. 06/2014 All rights reserved.

5.1.3 Display Menu Keys

Menu keys are used for menu access for parameter set-up,
toggling through status display modes during normal
operation, and viewing fault log data.
Quick
Status
Menu
Illustration 5.4 Menu Keys
Key Function
Status Shows operational information.
•
In Auto mode, press to toggle between
status readout displays.
•
Press repeatedly to scroll through each
status display.
•
Press [Status] plus [
display brightness.
•
The symbol in the upper right corner of the
display shows the direction of motor
rotation and which set-up is active. This is
not programmable.
Quick Menu Allows access to programming parameters for
initial set-up instructions and many detailed
application instructions.
•
Press to access Q2 Quick Set-up for
sequenced instructions to program the basic
frequency controller set-up.
•
Follow the sequence of parameters as
presented for the function set-up.
Main Menu Allows access to all programming parameters.
•
Press twice to access top-level index.
•
Press once to return to the last location
accessed.
•
Press to enter a parameter number for
direct access to that parameter.
Alarm Log Displays a list of current warnings, the last 10
alarms, and the maintenance log.
•
For details about the frequency converter
before it entered the alarm mode, select the
alarm number using the navigation keys
and press [OK].
Table 5.1 Function Description Menu Keys
Main Alarm
Menu Log
▲ ▼
] or [ ] to adjust the
41
5 5