Danfoss VLT Decentral Drive FCD 302 Operating Manual page 12

Installation
2 2
1 Inverter part
2 Fastening screws (4 x, 1 in each corner)
3 Sealing gasket
4 Inverter part plastic cover
5 Ground connection pin
6 Installation box
Illustration 2.2 Exploded View Large Unit
10
®
VLT Decentral Drive FCD 302
7 Display connection
8 Access to USB port
9 Service switch*-motor side (alternatively, switch located on mains side, or
not mounted)
10 Flat mounting brackets
11 Circuit breaker* (optional)
* The unit can be configured with either service switch or circuit breaker, not
both. The illustration shown is not configurable in practice, but is displayed
to show the respective positions of components only.
Danfoss A/S © 05/2016 All rights reserved. MG04F402