Mounting - Danfoss VLT Decentral Drive FCD 302 Operating Manual

Installation
2 2
Illustration 2.5 Top and Bottom Cooling Clearance

2.3.4 Mounting

The FCD 302 consists of two parts: The installation box and
the electronic part. See chapter 2.2 Exploded View of the
FCD 302.
WARNING
LOOSE ELECTRONIC PART
Do not switch on the mains before the 4 screws are
tightened. Failure to tighten these screws can result in
personal injury or material damage when the unit is
loaded.
Stand alone mounting
•
The holes on the rear of the installation box are
used to fix mounting brackets
•
Ensure that the strength of the mounting location
can support the unit weight
•
Make sure that the proper mounting screws or
bolts are used
12
®
VLT Decentral Drive FCD 302
100 (4)
100 (4)
100 (4)
100 (4)
Danfoss A/S © 05/2016 All rights reserved.
Illustration 2.6 FCD 302 Stand Alone Mounted with Mounting
Brackets
Permitted mounting positions
Illustration 2.7 Permitted Mounting Positions - Standard
Applications
MG04F402