Danfoss VLT Decentral Drive FCD 302 Operating Manual page 9

Introduction
Position Description
27 Fieldbus plug
28 Reserved
29–30 A option
31–32 B option
33–37 Reserved
38–39 D option
Illustration 1.2 Type Code Description
Not all choices/options are available for each FCD 302 variant. To verify if the appropriate version is available, consult the
Drive Configurator on the Internet:
driveconfig.danfoss.com.
NOTICE
A and D options for FCD 302 are integrated into the control card. Do not use pluggable options for frequency
converters. Future retrofit requires exchange of the entire control card. B options are pluggable, using the same concept
as for frequency converters.
MG04F402
Operating Guide
Choices/options
X No fieldbus plug
E M12 Ethernet
P M12 Profibus
X For future use
AX No A option
A0 Profibus DP
AN Ethernet IP
AL ProfiNet
BX No B option
BR Encoder option
BU Resolver option
BZ Safety PLC Interface
XXXXX For future use
DX No D option
D0 24 V DC back-up input
Danfoss A/S © 05/2016 All rights reserved.
1 1
7