Chapter 4. Unboxing And Setup; Server Package Contents; Identify The Server And Access The Lenovo Xclarity; Controller - Lenovo ThinkEdge SE350 V2 User Manual

Chapter 4. Unboxing and setup

Information in this section provides assistance regrading unboxing and setting up the server. When unboxing
the server, check if the items in the package are correct, and learn where to find information of server serial
number and Lenovo XClarity Controller access. Make sure to follow the instructions in "Server setup
checklist" on page 35 when setting up the server.

Server package contents

When receiving the server, verify that the shipment contains everything that is expected to receive.
The server package includes the following items:
• Server (node)
*
• (Optional) Rail installation kit and enclosure kit. Rail installation guide is provided in the package.
*
• (Optional) Cable Management Arm (CMA) kit. CMA installation guide is provided in the package.
*
• Material box, including items such as power cords, accessory kit, and printed documents.
Notes:
• Some of the items listed are available on select models only.
• Items marked with asterisk(*) are optional.
If any item is missing or damaged, contact your place of purchase. Ensure that you retain your proof of
purchase and packing material. They might be required to receive warranty service.
Identify the server and access the Lenovo XClarity Controller
This section contains instruction on how to identify your server and where to find the Lenovo XClarity
Controller access information.
Identifying your server
When you contact Lenovo for assistance, the machine type, model, and serial number information can help
support technicians to identify your server and provide faster service.
The illustration below shows the location of the ID label which contains the model number, machine type,
and serial number of the server. You can also add other system information labels to the front of the server in
the customer label spaces.
© Copyright Lenovo 2023
33