Ricoh D197 Service Manual page 1470

Bit Switches - 3
Treatment of pages received with
errors during G3 reception
2 0: Deleted from memory without
printing
1: Printed
Hang-up decision when a negative
code (RTN or PIN) is received
3
during G3 immediate transmission
0: No hang-up, 1: Hang-up
4-7 Not used
Communication Switch 03 (SP No. 1-104-004)
No Function
Maximum number of page
0-7 retransmissions in a G3
memory transmission
Communication Switch 04 (SP No. 1-104-005)
No
Remote mode switch (TEL mode)
0 0: Disable
1: Enable (Active)
Remote mode switch (FAX mode)
1 0: Disable
1: Enable (Active)
Remote mode switch (AUTO mode)
2 0: Disable
1: Enable (Active)
3-7 Not used
D3A5
00 - FF (Hex) times.
This setting is not used if ECM is switched on.
Default setting - 03(H)
Function
0: Pages received with errors are not
printed.
0: The next page will be sent even if RTN
or PIN is received.
1: The machine will send DCN and hang up
if it receives RTN or PIN.
This bit is ignored for memory
transmissions or if ECM is being used.
Do not change these settings.
Comments
Comments
Set this bit to ON when you wish to switch
TEL mode to FAX mode remotely.
Set this bit to ON when you wish to turn on
the remote mode switch after automatic
reception with FAX mode.
Set this bit to ON when you wish to turn on
the remote mode switch after automatic
reception with AUTO mode.
Do not change the settings.
118 SM