Ricoh D197 Service Manual page 1460

Bit Switches - 2
No Function
0-2 Not used
Maximum print width used in the
setup protocol
Bit 4 Bit 3
0 0
3-4
0 1
1 0
1 1
5-6 Not used
Received message width
restriction in the protocol signal
7
to the sender
0: Disabled
1: Enabled
Relationship between available paper sizes and printer width used in the setup protocol
Available Paper Size
A4 or 8.5" x 11"
B5
A5 or 8.5" x 5.5"
No paper available (Paper end)
D3A5
Printer Switch 01 (SP No. 1-103-002)
Do not change the settings.
Setting
These bits are only effective when bit 7 of
Not used
printer switch 01 is "1".
A3
B4
A4
Do not change the settings.
0: The machine informs the transmitting
machine of the print width depending on the
paper size available from the paper feed
stations.
Refer to the table on the next page for how the
machine chooses the paper width used in the
setup protocol (NSF/DIS).
1: The machine informs the transmitting
machine of the fixed paper width which is
specified by bits 3 and 4 above.
Printer width used in the Protocol (NSF/DIS)
297 mm width
256 mm width
216 mm width
216 mm width
108
Comments
SM