The Special Tools - What They Are / What They Do; Soligor Light Meter Setup; Soligor Mount Adaptor; Bowl Shroud - Zeiss humphrey HFA II-i series Field Service Manual

Humphrey Field Analyzer II - i
A.2

The Special Tools - What They Are / What They Do

A.2.1

Soligor Light Meter Setup

Figure A-2 shows proper setup of the Soligor light meter kit for use with the HFA II - i.
NOTE: When used on the HFA II - i, the rectangular cutout on the flat portion of the Soligor
mounting bracket points into the bowl. When the Soligor is used on the HFA I, the Soligor
handle fits into the rectangular cutout, and it points away from the bowl.
A.2.2

Soligor Mount Adaptor

Two angle brackets that allow the Soligor mount to be used on either HFA I or HFA II.
A.2.3

Bowl Shroud

A black shroud that drapes over the HFA and prevents ambient light from entering the bowl
when performing light intensity measurements.
A.2.4

Trial Lens Alignment Adaptor

A cylindrical nose piece that attaches to the tool stand (Figure A-1). It is used in conjunction
with the Trial Lens Holder Height Adaptor when verifying/adjusting the position of the trial lens
holder.
FIGURE A-1. Trial Lens Alignment Adaptor
52235C1105
Confidential and Proprietary
A - 3
Appendix A
Field Service Guide