Special Mapping - Zeiss Humphrey II-i series User Manual

Special Mapping

You can perform Special Mapping tests at the completion of either Manual or Step by Step Kinetic
testing. Special Mapping is not available for testing done in the Automatic mode. Special Mapping
provides you with a number of additional testing options which are described on the following
pages:
• Scotoma Mapping
• Blind Spot Map
• Static Points
• Custom Scan
1
From the Kinetic Test screen, check to ensure that the desired field
size is displayed. You cannot change the field size from within the
Special Mapping screen.
Press SPECIAL MAPPING.
2
The Special Mapping screen will appear.
Humphrey Field Analyzer II- i series User Manual
Kinetic Testing
13-27
2660021145640 A