Zeiss humphrey HFA II-i series Field Service Manual page 430

Instrument: Humphrey Field Analyzer II-i
Subject: Compatible External Printers List
Status: Informational
General Information
The printers listed below are approved for the HFA II-i.
Note: All printers must be used in conjunction with an isolation transformer or the printer must be
placed outside of the patient environment. The printers cannot be used in conjunction with a
power strip or extension cord.
Hewlett Packard LaserJet 1100 SE
Hewlett Packard LaserJet 1160 *
Hewlett Packard LaserJet 1200
Hewlett Packard LaserJet 1300
Hewlett Packard LaserJet 1320 – 220 volt version
Hewlett Packard LaserJet 3200
Lexmark E 312 L
Lexmark E 320
Lexmark E 321 *
Lexmark E 232 *
Brothers HL- 5040
Brothers HL-5050
Brothers HL-5140 *
Brothers HL-5240 *
Brothers HL-2700CN *
OKI B4250 *
* These printers are not qualified for 220 volt operation.
Printers must be used with a printer cable that meets the IEEE 1284 requirement. CZMI stocks and sells
a printer cable for the HFA II-i that meets the cable requirement. The part number for the HFA II-i printer
cable is P/N 51472.
CZMI does not sell or supply the above-mentioned external printers to customers, affiliates or distributors.
All warranty claims for external printers must be handled through the seller or manufacturer of the printer.
CZMI will provide limited technical support for approved printers operating with the HFA II-i. The nature of
this support will be limited to determining if the HFA II-i instrument is correctly configured for the external
printer, and that the instrument is correctly connected to the printer.
Should a customer choose to use a printer other than one of the approved printers, they do so at their
own risk.
ÚÚÚ
This bulletin replaces Service Bulletin FA2i-016E
PROPRIETARY and CONFIDENTIAL
SERVICE
BULLETIN
No.: FA2i-016F
Date: 3 Aug 06
Pages: 1
ÚÚÚ