Zeiss humphrey HFA II-i series Field Service Manual page 498

Instrument: Humphrey Field Analyzer II-i
Subject: New BIOS Utility Disk
Status: Informational
General Information
New components on the HFAII-i back plane required release of a new BIOS Utility Disk.
SBEP110J BIOS disk was designed to support both the old and new back plane. The
SBEP110J BIOS is compatible with all EMI CPU/Back Plane & Enclosures and Motor
Driver Boards.
New Part Number
61753
Notes: 1) The only circumstance that requires loading the SBEP110J BIOS is suspicion
of corruption to the existing BIOS.
2) The SBEP110J BIOS will be loaded on all new EMI CPU/Back Plane &
Enclosures, part number 60673.
To Load the BIOS SBEP110J
1) In the Advanced CMOS Settings of the BIOS setup, set the instrument BIOS boot
order to read first from the floppy disk.
2) Turn the instrument power Off. Turn On the HFA II-i (with the SBEP110J disk in the
drive).
3) The batch file on the disk will load and execute the new SBEP110J BIOS code.
Note: If you are overwriting the SBEP103B BIOS, the boot order will automatically be
set. If you are overwriting the SBEP110J BIOS, with the SBEP110J BIOS, the boot order
will not automatically be reset to the correct order. After loading the BIOS, you will have
to manually correct the boot order.
ÚÚÚ
Description
BIOS SBEP110J Software Installation Disk
PROPRIETARY and CONFIDENTIAL
SERVICE
BULLETIN
No.: FA2i-039
Date: 30 Oct 06
Pages: 1
The
ÚÚÚ