Ir Bowl Plug Removal/Installation - Zeiss humphrey HFA II-i series Field Service Manual

Humphrey Field Analyzer II - i

3.44 IR Bowl Plug Removal/Installation

1) Remove the two screws holding the IR Illumination Plug Bracket to the bowl.
2) When installing the IR Bowl Plug, you must rotate the plug until it's contoured
tip is flush with the inner surface of the bowl before tightening the screw that
holds it to the bracket
Replacement Notes:
Follow-up Checks/Adjustments:
See Table 3-1.
52235C1105
Parts Removal/Replacement
Confidential and Proprietary
3 - 55
Field Service Guide