Canon imageRUNNER ADVANCE C255 Series Service Manual page 713

COPIER (Service mode for copier) > FUNCTION (Operation / inspection mode) > CLEAR
JV-CACHE 1
Detail
Use Case
Adj/Set/Operate Method
LANG-CLR 2
Detail
Use Case
Adj/Set/Operate Method
Caution
Supplement/Memo
FIN-MCON 1
Detail
Use Case
Adj/Set/Operate Method
Additional Functions
Mode
PLPW-CLR 2
Detail
Use Case
Adj/Set/Operate Method
Cache clear of JAVA application
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the cache information used by JAVA application.
When initializing the JAVA application
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Uninstallation of language files
To uninstall the language files other than Japanese and English files installed in HDD.
When installing a new language file while the maximum number of language files (11 files) have
been already installed, an existing language file needs to be uninstalled.
When deleting/switching language files
1) Select the item, and then press OK key.
2) Download the firmware in which the necessary language files are included using SST or a USB
memory.
A language file is not uninstalled unless the downloaded language files are installed by SST or a
USB memory after the execution of this item. If installation is not executed, uninstallation will be
canceled. (Status of the machine remains the same as it was before execution.)
- After the execution, language displayed on the screen becomes English. Switch the language as
needed.
- There are 9 language files (JEFIGSCKT) installed at the time of shipment.
Clearing Finisher delvry destination set
To clear the setting of Delivery Tray of the Finisher specified in Settings/Registration (Function
Settings> Common> Paper Output Settings> Output Tray Settings).
Since the delivery destination settings are stored in the DC Controller PCB in the machine,
malfunction occurs when replacing the Finisher with a different model without clearing the settings.
If the model of the Finishers is the same, there is no need to clear the settings.
When the Finisher is replaced with a different model in the field
1) Select the item, and then press OK key.
2) Turn OFF/ON the main power switch.
Function Settings> Common> Paper Output Settings> Output Tray Settings
Clear security policy setting password
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To clear the password of the security administrator set in the security policy settings.
When clearing the password of the security administrator
Select the item, and then press OK key.
702
8. Service Mode