Canon imageRUNNER ADVANCE C255 Series Service Manual page 830

COPIER (Service mode for copier) > OPTION (Specification setting mode) > LCNS-TR
ST-2600 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-2600 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-OPFNT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-OPFNT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-NCAPT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Instal state dspl: IEEE2600.1 scrty func
To display installation state of the IEEE2600.1 security function when transfer is disabled.
When checking whether the IEEE2600.1 security function is installed
1) Select ST-2600.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-2600.
When operation finished normally: OK!
According to the setting at shipment
Trn lcns key dspl: IEEE2600.1 scrty func
To display transfer license key to use IEEE2600.1 security function when transfer is disabled.
- When replacing HDD
- When replacing the device
1) Select ST-2600.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-2600.
24 digits
Install state display of PCL Font Set
To display installation state of PCL Font Set when disabling the function with license transfer.
When checking whether PCL Font Set is installed
1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-OPFNT.
When operation finished normally: OK!
According to the setting at shipment
Trns license key display of PCL Font Set
To display transfer license key to use the PCL Font Set when disabling the function with license
transfer.
- When replacing HDD
- When replacing the device
1) Select ST-OPFNT.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-OPFNT.
24 digits
Install state display of NetCap function
To display installation state of network packet capture function when disabling the function with
license transfer.
When checking whether network packet capture function is installed
1) Select ST-NCAPT.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-NCAPT.
When operation finished normally: OK!
0
819
8. Service Mode