Canon imageRUNNER ADVANCE C255 Series Service Manual page 583

COPIER (Service mode for copier) > DISPLAY (State display mode) > DENS
D-C-LVL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
D-K-LVL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
■ MISC
COPIER (Service mode for copier) > DISPLAY (State display mode) > MISC
LPOWER-Y 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Additional Functions
Mode
LPOWER-M 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Additional Functions
Mode
LPOWER-C 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Additional Functions
Mode
LPOWER-K 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
TNRB-IDY 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Display of ATR patch form level (C)
To display the ATR patch form level of C-color.
When judging whether there is an error in the ATR patch form level at E020 occurrence
N/A (Display only)
-30 to 30
COPIER> DISPLAY> DENS> D-C-TRGT
Display of ATR patch form level (Bk)
To display the ATR patch form level of Bk-color.
When judging whether there is an error in the ATR patch form level at E020 occurrence
N/A (Display only)
-30 to 30
COPIER> DISPLAY> DENS> D-K-TRGT
Display of laser power (Y)
To display the Y laser power at the latest output.
When analyzing the cause of image failure (low density, ghost, etc.)
N/A (Display only)
0 to 255
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation> Full Adjust, Quick Adjust
Display of laser power (M)
To display the M laser power at the latest output.
When analyzing the cause of image failure (low density, ghost, etc.)
N/A (Display only)
0 to 255
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation> Full Adjust, Quick Adjust
Display of laser power (C)
To display the C laser power at the latest output.
When analyzing the cause of image failure (low density, ghost, etc.)
N/A (Display only)
0 to 255
Adjustment/Maintenance> Adjust Image Quality> Auto Adjust Gradation> Full Adjust, Quick Adjust
Display of laser power (Bk)
To display the Bk laser power at the latest output.
When analyzing the cause of image failure (low density, ghost, etc.)
N/A (Display only)
0 to 255
Display of Y-color Toner Container ID
To display the ID of Y-color Toner Container that is installed to the machine
When checking whether the barcode ID on the Toner Container is read correctly
N/A (Display only)
12-digit decimal number
572
8. Service Mode