Copier (Service Mode For Copier); Display (State Display Mode) - Canon imageRUNNER ADVANCE C255 Series Service Manual

COPIER (Service mode for copier)

DISPLAY (State display mode)

■ VERSION
COPIER (Service mode for copier) > DISPLAY (State display mode) > VERSION
DC-CON 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
PANEL 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ECO 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ECO-ID 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
SORTER 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
NIB 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
MN-CONT 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Display of DCON firmware version
To display the firmware version of DC Controller PCB.
When upgrading the firmware
N/A (Display only)
00.01 to 99.99
Dspl of Control Panel CPU PCB ROM ver
To display the ROM version of Control Panel CPU PCB.
When upgrading the firmware
N/A (Display only)
00.01 to 99.99
Display of ECO-ID PCB firmware version
To display the firmware version of the ECO-ID PCB.
When upgrading the firmware
N/A (Display only)
00.01 to 99.99
Display of ECO-ID code
To display the ECO-ID code.
When upgrading the firmware
N/A (Display only)
ASCII character string (12 digits)
Dspl of FIN-CONT (Main) firmware version
To display the firmware version of Finisher Controller PCB (Main).
When upgrading the firmware
N/A (Display only)
00.01 to 99.99
Display of network software version
To display the version of the network software.
When upgrading the firmware
N/A (Display only)
00.01 to 99.99
Display of MNCON firmware version
To display the firmware version of Main Controller PCB.
When upgrading the firmware
N/A (Display only)
00.01 to 99.99
497
8. Service Mode