Canon imageRUNNER ADVANCE C255 Series Service Manual page 794

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
CNT-SW 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
CNT-PRT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
COPY-JOB 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
JOB-INVL 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TAB-ROT 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Set default dspl items on charge counter
To set default display items of the charge counter on the Counter Check screen.
For details of each type, refer to the Service Manual.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Type1 , 1: Type2
0
ON/OFF of parts counter report output
To set whether to print parts counter values on the counter report.
When grasping the estimated life of parts while the monitoring service function is not used
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF (Not print), 1: ON (Print)
It differs according to the location.
Check Counter> Print List
Setting of copy job reservation
To set to enable/disable copy job reservation when the Card Reader/Coin Manager is used.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Enabled, 1: Disabled
0
Job intvl setting at interruption copy
To set output interval between jobs at the time of interruption copy.
Sorting is difficult after interruption copy because of the continuous output of the next job. Paper
interval becomes longer when starting pickup for the next job after the last sheet of the previous
job is delivered.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Continuous output of the interruption copy and the next job
1: Starting pickup for the next job after the interruption copy is delivered all.
2: Starting pickup for the next job after the previous job is delivered all. (For all jobs)
0
Set of landscape img rotn at PDL:tab ppr
To set whether to rotate landscape image by 180 degrees when PDL print is made on tab paper.
When "1: Rotated" is set, image is rotated.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Not rotated, 1: Rotated
0
783
8. Service Mode