Canon imageRUNNER ADVANCE C255 Series Service Manual page 753

COPIER (Service mode for copier) > OPTION (Specification setting mode) > NETWORK
PROXYRES
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
WOLTRANS
Detail
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
802XTOUT
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
IKERETRY
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Unit
Default Value
Supplement/Memo
2 Setting of proxy response to Windows
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to provide proxy response or return the device status when an inquiry is received
via Windows while the device is in sleep mode.
When executing status response for query from Windows correctly
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: No proxy response, 1: Proxy response
1
1 ON/OFF sleep recover by packet reception
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to recover from deep sleep when receiving unicast packets to the machine
(excluding proxy response).
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
1 to 2
1: ON, 2: OFF
1
1 Set of IEEE802.1X authentication timeout
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set timeout value for IEEE802.1X authentication.
If the device executes 802.1X authentication, change the wait time for response from the
authentication server.
When response from the authentication server is slow/fast
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
10 to 120
30
1 Setting of IKE retry times
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set the number of retries in the case of no response from the communication target at the time
of IKE packet transmission.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
time
1
IKE: Internet Key Exchange
742
8. Service Mode