Canon imageRUNNER ADVANCE C255 Series Service Manual page 344

• COPIER > TEST > PG > COLOR-M
• COPIER > TEST > PG > COLOR-C
• COPIER > TEST > PG > COLOR-K
• COPIER > TEST > PG > DENS-Y
• COPIER > TEST > PG > DENS-M
• COPIER > TEST > PG > DENS-C
• COPIER > TEST > PG > DENS-K
• COPIER > TEST > PG > F/M-SW
Stop positions and check items
Items that can be checked differ depending on the position where paper stops.
Check for fold/skew/crease/operation check/jam/checking of image on ITB with reference to the table below. (Setting values other
than the following are not used.)
Set- Stop position
ting
value
0 Not forcibly stopped
1 After pickup from the Cas-
sette 1
2 After pickup from the Cas-
sette 2
3 After pickup from the Cas-
sette 3
4 After pickup from the Cas-
sette 4
20 Pre-registration (1st side)
21 Pre-registration (2nd side) *
30 Secondary pre-transfer (1st
side)
31 Secondary pre-transfer (2nd
side) *
32 Pre-fixing
40 Post-fixing
70 Post-reverse *
71 Duplex standby position*
99 Secondary pre-transfer
(when checking the image)
* : Paper is stopped when a duplex job is executed (paper is stopped after being reversed).
Bend Skew
- -
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes Yes
Yes -
Yes Yes
Yes Yes
- -
333
Wrinkle Operation
check/Jam
- -
- Yes
- Yes
- Yes
- Yes
- Yes
- Yes
Yes Yes
Yes Yes
Yes Yes
- Yes
- Yes
- Yes
- -
6. Troubleshooting
Checking of the
image on the
ITB
-
-
-
-
-
-
-
Yes
Yes
Yes
-
-
-
Yes