Canon imageRUNNER ADVANCE C255 Series Service Manual page 852

COPIER (Service mode for copier) > COUNTER (Counter mode) > DRBL-1
MN-DR-U 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
TNB-DRV1 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
TNB-DRV2 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
HOPPER-K 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
HOPPER-Y 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
Main Drive Unit parts counter
1st line: Total counter value from the previous replacement
2nd line: Estimated life
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
0
Bottle Drive Unit 1 parts counter
1st line: Total counter value from the previous replacement
2nd line: Estimated life
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
0
Bottle Drive Unit 2 parts counter
1st line: Total counter value from the previous replacement
2nd line: Estimated life
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
0
Hopper (Bk) parts counter
1st line: Total counter value from the previous replacement
2nd line: Estimated life
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
0
Hopper (Y) parts counter
1st line: Total counter value from the previous replacement
2nd line: Estimated life
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
0
841
8. Service Mode