Canon imageRUNNER ADVANCE C255 Series Service Manual page 799

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
PRNT-POS 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
AFN-PSWD 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PTJAM-RC 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
PDL-NCSW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ON/OFF of all pauses at error job cancel
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set whether to pause the print operation of following jobs when a job is canceled due to an error
inside the machine (#037, etc.) except service calls during PDL print.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
Setting of Set/Reg menu access limit
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set restriction on accessing Settings/Registration menu by entering password.
With the setting to enable this mode, password entry of system administrator is required after
pressing Settings/Registration key.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Password is not required, 1: Password is required
0
Auto reprint setting at PDL print jam
To set to automatically restart printing after jam recovery that occurs with PDL print.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Not automatically reprinted, 1: Automatically reprinted
1
Card mngm setting for PDL print job
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set to make PDL print job to be subject to card management by the Card Reader.
With the setting to enable this mode, PDL print is available only when the card ID of the card
inserted to the Card Reader matches the department ID.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: PDL print is available with no card inserted.
1: PDL print is available only when the card ID matches the department ID in the case that the
card is inserted.
0
788
8. Service Mode