Canon imageRUNNER ADVANCE C255 Series Service Manual page 827

COPIER (Service mode for copier) > OPTION (Specification setting mode) > LCNS-TR
ST-PSLIP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-PSLIP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-PSPCU 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-PSPCU 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
ST-LXUFR 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
TR-LXUFR 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Install state dspl of PS/LIPS4 func: JP
To display installation state of PS/LIPS4 function (JP only) when transfer is disabled.
When checking whether PS/LIPS4 function (JP only) is installed
1) Select ST-PSLIP.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PSLIP.
When operation finished normally: OK!
According to the setting at shipment
Trns license key dspl: PS/LIPS4 func:JP
To display transfer license key to use PS/LIPS4 function (JP only) when transfer is disabled.
- When replacing HDD
- When replacing the device
1) Select ST-PSLIP.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSLIP.
24 digits
Install state dspl of PS/PCL/UFR II func
To display installation state of PS/PCL/UFR II function when transfer is disabled.
When checking whether PS/PCL/UFR II function is installed
1) Select ST-PSPCU.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-PSPCU.
When operation finished normally: OK!
According to the setting at shipment
Trns lcns key dspl of PS/PCL/UFR II func
To display transfer license key to use PS/PCL/UFR II function when transfer is disabled.
- When replacing HDD
- When replacing the device
1) Select ST-PSPCU.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-PSPCU.
24 digits
Install state display of UFR II function
To display installation state of UFR II function when transfer is disabled.
When checking whether UFR II function is installed
1) Select ST-LXUFR.
2) Enter 0, and then press OK key.
When installation has been completed, the transfer license key is displayed under TR-LXUFR.
When operation finished normally: OK!
According to the setting at shipment
Trns license key dspl of UFR II function
To display transfer license key to use UFR II function when transfer is disabled.
- When replacing HDD
- When replacing the device
1) Select ST-LXUFR.
2) Enter 0, and then press OK key.
The transfer license key is displayed under TR-LXUFR.
24 digits
816
8. Service Mode