Canon imageRUNNER ADVANCE C255 Series Service Manual page 803

COPIER (Service mode for copier) > OPTION (Specification setting mode) > USER
IFAX-OF 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Default Value
LDAP-DEF 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
FREE-DSP 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
TNRB-SW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
IFAX send prohibition to entered address
*Operation on this item is restricted by the setting of [Restrict Service Representation Access].
To set to prohibit address entry at the time of I-Fax transmission.
IFAX transmission is not available by entering the address because of no display of "I-Fax" on the
transmission screen.
The addresses already registered in the Address Book can be used.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
To restrict addresses for transmission, be sure to manually delete them because the addresses
registered in the Address Book can be used.
0 to 1
0: Enabled, 1: Disabled
0
Initial condtn set of LDAP server search
To set initial condition for search target attribute that is specified at the time of LDAP server Details
search.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 6
0: Name, 1: E-mail, 2: FAX, 3: Organization, 4: Organization unit, 5: No registration 1 (any setting),
6: No registration 2 (any setting)
0
COPIER> OPTION> USER> LDAP-SW
Display/hide of charge disable screen
To set whether to display or hide the Use Charge Management screen for switching between
charge and no charge.
The hardware switch for switching charge/no charge in the Coin Manager enables the mode in
which all the services are available for free (store manager mode) by temporarily releasing the
charging system.
Even without the hardware switch, the mode can be switched with the software switch when it is
set to display the Use Charge Management screen in Settings/Registration.
When enabling all the services to be provided for free by temporarily releasing the charging system
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
0
Management Settings> Charge Management> Use Charge Management
Display/hide of Toner Container counter
To set whether to display the Toner Container counter on the Counter Check screen.
When not showing the screen to users
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 3
0: Hide, 1: Display (Toner Container counter 70s), 2: Not used, 3: Display (Toner Container counter
70s and 180s)
It differs according to the location.
792
8. Service Mode