Canon imageRUNNER ADVANCE C255 Series Service Manual page 742

COPIER (Service mode for copier) > OPTION (Specification setting mode) > DSPLY-SW
FXMSG-SW 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
UI-PRINT 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
IMGC-ADJ 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Additional Functions
Mode
UI-RSCAN 2
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
ON/OFF of Fixing Assembly replace mssg
To set whether to display the message prompting to replace the Fixing Assembly on the Control
Panel when the counter for life judgment reaches the specified value.
When FXMSG-SW is 1 and COPIER> OPTION> FNC-SW> FXWRNLVL is 1 (default: 0), the Fixing
Assembly life detection is performed.
When the Fixing Assembly reaches its life, the Fixing Assembly replacement message "Prepare
new fixing assembly." is displayed.
When displaying the Fixing Assembly replacement message
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: OFF, 1: ON
0
COPIER> OPTION> FNC-SW> FXWRNLVL
Set of secured print-related UI display
To set whether to display UI related to secured print.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 2
0: Hide all UIs related to secured print
1: Display all UIs related to secured print
2: Hide Secured Print button in the main menu and the simple authentication settings in Settings/
Registration menu
0
COPIER> OPTION> USER> LGCY-SCP
ON/OFF of img adj item display: Set/Reg
To set whether to display the item relating to image adjustment in Settings/Registration menu.
When 1 is set, detailed image adjustment procedure will be displayed only for the duplicated paper
specified with the following settings: Preferences> Paper Settings> Paper Type Management
Settings.
As needed
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
0
Preferences> Paper Settings> Set Paper Type Management
Display/hide of remote scan screen
To set whether to display or hide the remote scan screen on the Control Panel.
Upon user's request
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
0 to 1
0: Hide, 1: Display
1
731
8. Service Mode