Step 2. Save The File - Agilent Technologies ESA Series Getting Started Manual

7. Activate trace 3 by pressing
Figure 4-5.
Figure 4-5. Viewing Traces 1, 2, and 3

Step 2. Save the file

1. To access the Save menu, press,
2. Select the type of file you want to save. In this example you are saving a trace; press
NOTE Trace files are not bitmap files. Files saved as
applications or converted. If you require the use of other applications, for example
Microsoft Word or Microsoft Excel, be sure to save your files as .gif or .wmf formats
using Screen
3. Select the trace you wish to save (1, 2, 3, or all traces). In this example you will save trace 3; press
(softkey),
Source Trace 3
4. Select the format you wish to use for saving the trace, either trace plus state (
comma separated value (
.
+ State
5. Enter a filename by pressing
file, "TEST1". (The numeric keypad is also available for the filename.) Note that the file extension is
always set by the system and for this file type the extension is TRC. You must now press the
(hardkey) to get back to the
NOTE
You need to use a filename that does not already exist in the current directory. The
Chapter 4
Trace (3) , Clear Write
File , Save .
for your file Type .
.
CSV ). In this example you will save as trace plus state; press
Name . The Alpha Editor appears. For this example you will name the
menu.
Save
Viewing Catalogs and Saving Files
. Your analyzer display should look similar to
cannot be imported into other
Trace
Saving a File
Type, Trace .
) or
Trace + State
Format , Trace
Enter
57