Step 2. Save The File - Agilent Technologies PSA Series Getting Started Manual

Figure 4-4 Viewing Traces 1, 2, and 3

Step 2. Save the file

1. To access the Save menu, press,
2. Select the type of file you want to save. In this example you are saving a trace;
Trace files are not bitmap files. Files saved as
NOTE
applications or converted. If you require the use of other applications, for example
Microsoft Word or Microsoft Excel, be sure to save your files as .gif or .wmf
formats using
also be imported into Microsoft Excel.
3. Select the trace you wish to save (1, 2, 3, or all traces). In this example you will
4. Select the format you wish to use for saving the trace, either trace plus state
5. Enter a filename by pressing
NOTE You need to use a filename that does not already exist in the current directory. The
Chapter 4
press Type, Trace .
for your file
Screen
save trace 3; press
Source
( ) or comma separated value (
Trace + State
save as trace plus state; press
example you will name the file, "TEST1". (The numeric keypad is also
available for the filename.) The file extension is always set by the system and
for this file type the extension is TRC. You must now press the
to get back to the Save
Viewing Catalogs and Saving Files
, .
File Save
Trace
. Comma separated value (csv) files can
Type
(softkey in the Save menu),
CSV
Format , Trace + State
. The Alpha Editor appears. For this
Name
menu.
Saving a File
cannot be imported into other
.
Trace 3
). In this example you will
.
(hardkey)
Enter
53