Expansion Interfafe Card Leds; Hot Plug Led (Next To Hot Plug Buttons); Master Rst Led & Power Led - Magma EB7-X8G2 User Manual

Expansion interfafe card LEDs

The Expansion Interface card will show 5 solid green LEDs illuminated. The normal LED indicator on the Expansion
Interface card should display 5 solid green LEDs, this signifies that unit is trained / linked to x8.

Hot Plug LED (next to Hot Plug buttons)

Hot Plug LEDs should be off once the computer has booted all the way up. In this instance there are no PCIe cards, so it
is normal for Hot plug LEDs to be off.
 D39, D34, D24, D20, D33, D25, D21>> should be OFF, when all the slots have no PCIe cards installed
 D39, D34, D24, D20, D33, D25, D21>> should be ON as green, when all slots are populated with PCIe cards
MASTER RST LED & Power LED
The MASTER RST LED (D1217) and Power LED (D1221)on the expansion board should be OFF once the computer is linked
with expansion unit.
EB7-X8G2 | Chapter 2 Hardware Installation
Magma
19