Locating The Problem - Magma EB7-X8G2 User Manual

Now locate the J6 jumper as shown below

Locating the Problem

If you are having trouble with the Magma expansion system, first verify that all cards and cables are seated properly. Be
sure you followed the instructions in earlier sections of this Service Manual. Always remember to power On and Off
correctly when rechecking your installation. If you are still having problems, try these troubleshooting steps:
 My Computer Can't Find the PCIe Expansion System
 When Nothing Works
 My PCIe Card Doesn't Work
 My system hangs beyond a certain number of add-in cards
The Magma PCIe Expansion System is correctly displayed as a "PCI standard PCI-to-PCI bridge" in Windows Device
Manager and as a "pci-bridge" in the MAC Apple System Profiler and in Linux. When connected and functioning
correctly, this Expansion System will be displayed as follows:
Windows
EB7-X8G2 | Chapter 6 Troubleshooting
Magma
56