Configure Network Settings - Magma EB7-X8G2 User Manual

Magma

Configure Network Settings

Open your browser and enter the IP address in the URL window and press Enter. The following browser window will open
up:
The initial, Generic Info page provides status information and no username or password is required. If the main power
switch is off, then this page will show the IP Address that is currently assigned to the chassis, the IP Address that will
receive trap information, the temperature settings and that the chassis is powered off. To make changes to your settings
you will need to follow the "IP Configuration" link. The IP configuration page is password protected and before access is
given the following dialog will appear:
The factory settings define User name to be "default" and the password to be "magma". Enter these values in the
appropriate field and click OK. If the username and password have not been changed from the factory settings, the IP
Configuration page will appear as shown below. If it doesn't, see your network administrator for the correct user name
and password.
EB7-X8G2 | Chapter 4 Install PCIe Cards 36