Eeprom Write Protect (Wp); Pcie Switch I2C Address Setting - Magma EB7-X8G2 User Manual

Magma

EEPROM Write Protect (WP)

J9 is used to enable or disable writing/programming the EEPROM with new code. Since EEPROM programming should be
done only by Magma personnel, it is recommended to keep write-protection on.

PCIe Switch I2C Address Setting

SW9 is used to specify a different address for the PCIe switch in its secondary I2C bus. To be used by Magma personnel
only.
EB7-X8G2 | Chapter 4 Install PCIe Cards 47