M A G M A
Attach Power and Expansion Cables
Carefully position the expansion chassis so that the supplied expansion
cables will conveniently reach from the host computer to the bottom
connector on the back of the chassis.
CAUTION
All cables attached to the expansion chassis must be securely
fastened. When you hear a "click," it is properly secured. If not
securely connected, the connectors may cause intermittent or lost
connections.
Connect the power cords to the
power-in receptacles located at
the rear of the enclosure.
NOTE
If at all possible, plug all power cords from the expansion chassis
and your host computer into a shared power strip, preferably one
that has surge and noise suppression circuitry built into it.
8
Chapter 2
Hardware Installation