Connect Ipass Cable - Magma EB7-X8G2 User Manual

Magma

Connect iPass Cable

The 1-meter iPass cable included with your Magma expansion chassis features a x8 connector on each side. Connect
the iPass cable to Expansion and Host Interface cards. For the proper way of connecting the iPass cable to Interface
card, see pictures below.
Carefully position the expansion chassis so that the supplied expansion cable will conveniently reach from the host
computer to the connectors on the back of the chassis. Connect one end of the iPass cable to the expansion chassis'
iPass connector. Then connect the other end of the iPass cable to the host card located in the host computer.
EB7-X8G2 | Chapter 2 Hardware Installation 14