I/O Switching - Magma EB7-X8G2 User Manual

IMPORTANT
In order to successfully apply this function you must first set the
Jumper
position of that jumper.
Additionally, the chassis' master on/off switch as well as each of the redundant
power supplies' switches must be turned ON.

I/O Switching

The SNMP interface allows us to configure voluntary I/O switching so that the resources offered by PCIe cards installed in
the Magma chassis can be rolled from one PC to another in real time. To access this feature, click on the I/O Failover link
as shown below:
For more information on this feature see
in the position between PS_ON and ON_BY_MCU. This is not the default
Appendix B: I/O Switching
EB7-X8G2 | Chapter 4 Install PCIe Cards
Magma
SNMP Power-on
41